Deutsch Connector Technical Specs
- Material Specifications
- Housings: (Plug & Receptacle) - Thermoplastic
- Seals: Silicone Rubber
- Secondary Locks: Thermoplastic
- Contacts: Copper Alloy, Nickel Plated, Gold optional
- General Specifications
- Dielectric Withstanding Voltage: (Test Voltage): Sea Level 1500 VAC (rms)
- Current Rating (Maximum): false 16 Pin or Socket 13 amps
- Silicone Insert: Front and rear silicone inserts are devoid of all organic matter.
- ARC Resistance: All dielectric materials withstand a minimum of 130 seconds per ASTM D-495
- Physical Shock: false unlocking, unmating or other unsatisfactory result after 50g's in each of three mutually perpendicular planes.
- Dielectric Strength: 1500 volts minimum.
- Submersion: Properly wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage.
- Vibration: Maintains continuity and exhibits no mechanical or physical damage after vibration of 20 g's at 10-2000 Hz.
- Temperature: Operative at temperatures from - 55°C to +125°C (-67°F to +257°F ) at rated current.
- Contact Retention: Contacts withstand a minimum load of 25 lbs. for size 16.
- Thermal Shock: false cracking, chipping or leaking after 5 test cycles from -55°C to +125°C
- Insulation Resistance: 1000 megohms minimum at 25°C
- Usable Wire Size: false. 16 contacts receive conductors 12-20 AWG. Rear insert will seal on smooth insulation from .088" to .145" O.D. Reduced diameter seals optional.
- Durability: false electrical or mechanical defects after 100 cycles of engagement and disengagement.
- Contact Millivolt Drop: false. 16 contacts - 100 millivolt drop (Less drop through wire.) using 16 AWG wire. Test current 13 amps.
